Mini Educator ET-300 (1 Dog)

Turning the Receiver On and Off

• Align the red dot on the receiver with the red dot on the controller.
• Hold them together until the receiver light turns green to turn it on, or red to turn it off.

Turning the Controller On

• Press and hold the large button marked L on the back of the controller until the display turns on.

Programming Constant Only Stimulation

• Press the small M/C button on the back of the controller.
• Repeat this press until only the C (Continuous) symbol shows on the screen.

Adjusting and Locking the Stimulation Level

• Use the dial at the top of the controller to find the lowest level that gains your dog’s attention.
• Press down directly on the dial to lock the selection, and press it again to unlock.
• The red S button increases the set stimulation level by 5 for emergency situations.

Programming Tone Settings

• Press the L and T buttons at the same time until you hear a beep.
• This changes the tool from the default vibration setting to an audible tone.
• If the tone button is held down for more than 3 seconds, the receiver automatically switches to deliver the lowest level of stimulation.

Operating the Receiver Light

• First press (L button): Activates a flashing light.
• Second press: Activates a solid, constant light.
• Third press: Turns the light off.

 

⁠